Full-Dimension Rough Sawn Lumber
Pricing Links:
White Cedar - CLICK HERE
White Pine - CLICK HERE
Red Pine - CLICK HERE
Hardwoods - CLICK HERE
Board Foot Formula:
(Thickness in inches × Width in inches × Length in feet) ÷ 12
​
What Is Full-Dimension Rough Sawn Lumber?
​
Full-dimension rough sawn lumber is cut to true thickness and width, not planed down to nominal sizing like store-bought lumber. Rough sawn boards come straight from the mill, retaining their full structural size, natural texture, and strength.
​
Because the lumber is not surfaced, you get more material per board foot, a stronger final product, and the flexibility to either leave it rough for a rustic look or plane it later to your desired finish.
​
Benefits of Rough Sawn, Full-Dimension Lumber
​
-
True full size (not reduced by planing)
-
Stronger and heavier than dimensional lumber
-
Higher yield per board foot
-
Natural rough texture for rustic or traditional builds
-
Excellent for outdoor use, framing, barns, sheds, saunas, cottages, and cabins
-
Can be planed, sanded, or finished later if required
All lumber listed below is rough sawn, full dimension, and priced by board foot (bdft).
Rough Sawn Eastern White Cedar Lumber
Eastern White Cedar – Characteristics & Uses
Eastern White Cedar is prized for its natural rot resistance, insect resistance, and long service life outdoors. It is lightweight, stable, and aromatic, making it one of the best choices for exterior and specialty projects without chemical treatment.
​
Common uses for rough sawn Eastern White Cedar include:
-
Saunas and sauna interiors
-
Fencing and privacy screens
-
Board and batten siding
-
Sheds, cabins, and bunkies
-
Pergolas, gazebos, and garden structures
-
Trim, fascia, and decorative accents
-
Benches and outdoor furniture
Additional characteristics:
-
Naturally weather-resistant
-
Performs well in wet or humid environments
-
Pleasant cedar aroma (natural insect deterrent)
-
Accepts stains, oils, and clear finishes very well
Eastern White Cedar Pricing
Regular Cedar Sizes (6’–12’)
$2.20 / bdft
1" Thick
-
Rough sawn 1x3 Eastern White Cedar (6’, 8’, 10’, 12’)
-
Rough sawn 1x4 Eastern White Cedar (6’, 8’, 10’, 12’)
-
Rough sawn 1x5 Eastern White Cedar (6’, 8’, 10’, 12’)
-
Rough sawn 1x6 Eastern White Cedar (6’, 8’, 10’, 12’)
2" Thick
-
Rough sawn 2x2 Eastern White Cedar (6’, 8’, 10’, 12’)
-
Rough sawn 2x3 Eastern White Cedar (6’, 8’, 10’, 12’)
-
Rough sawn 2x4 Eastern White Cedar (6’, 8’, 10’, 12’)
-
Rough sawn 2x5 Eastern White Cedar (6’, 8’, 10’, 12’)
-
Rough sawn 2x6 Eastern White Cedar (6’, 8’, 10’, 12’)
Premium Cedar Sizes (14’–16’)
$2.50 / bdft
-
Rough sawn 1x8 Eastern White Cedar (14’, 16’)
-
Rough sawn 1x10 Eastern White Cedar (14’, 16’)
-
Rough sawn 2x8 Eastern White Cedar (14’, 16’)
-
Rough sawn 2x10 Eastern White Cedar (14’, 16’)
Custom Cedar Lumber
Starting at $2.75 / bdft
-
Widths over 10”
-
Lengths over 16’
-
Extra-thick or irregular dimensions
-
Specialty or character cedar
Rough Sawn Eastern White Pine Lumber
Eastern White Pine – Characteristics & Uses
Eastern White Pine is a versatile, economical, and easy-to-work softwood commonly used for structural and general construction projects. It offers a good balance of strength and workability, making it ideal for both large builds and custom projects.
​
Common uses for rough sawn Eastern White Pine include:
-
Barns and agricultural buildings
-
Sheds, garages, and workshops
-
Cabins, camps, and cottages
-
Interior wall and ceiling cladding
-
Framing, blocking, and bracing
-
Rustic furniture and shelving
Additional characteristics:
-
Easy to cut, drill, and fasten
-
Accepts paint, stain, and clear finishes well
-
Cost-effective for large volume projects
-
Consistent grain and stable performance
Eastern White Pine Pricing
White Pine Sizes (6’–16’)
$1.50 / bdft
1" Thick
-
Rough sawn 1x3 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x4 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x5 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x6 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x8 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x10 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
2" Thick
-
Rough sawn 2x2 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 2x4 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 2x6 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 2x8 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 2x10 Eastern White Pine (6’, 8’, 10’, 12’, 14’, 16’)
Custom White Pine Lumber
$1.70 / bdft
-
Widths over 10”
-
Lengths over 16’
-
Timbers, beams, and specialty cuts
Rough Sawn Red Pine Lumber
Red Pine – Characteristics & Uses
Red Pine is a dense, strong softwood well suited for structural and load-bearing applications. It offers greater stiffness and nail-holding ability than white pine, making it a solid choice for heavy construction.
​
Common uses for rough sawn Red Pine include:
-
Structural framing and beams
-
Pole barns and agricultural buildings
-
Deck framing and outdoor structures
-
Posts, girts, and trusses
-
Heavy-duty fencing and gates
Additional characteristics:
-
Higher density and strength
-
Excellent fastener holding
-
Can be pressure treated if required
-
Suitable for interior or exterior use
Red Pine Pricing
Red Pine Sizes (6’–16’)
$1.50 / bdft
1" Thick
-
Rough sawn 1x3 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x4 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x5 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x6 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x8 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 1x10 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
2" Thick
-
Rough sawn 2x4 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 2x6 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 2x8 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
-
Rough sawn 2x10 Red Pine (6’, 8’, 10’, 12’, 14’, 16’)
Custom Red Pine Lumber
$1.70 / bdft
-
Oversize widths
-
Long lengths
-
Structural beams and specialty cuts
Rough Sawn Hardwood Lumber (Custom Orders)
Hardwood Lumber – Characteristics & Uses
Hardwood lumber offers superior strength, durability, and appearance, making it ideal for projects where wear resistance and visual quality matter. All hardwood lumber is rough sawn and custom cut upon request, depending on species availability.
​
Available hardwood species include:
-
Maple – hard, smooth grain, excellent for furniture and work surfaces
-
Oak – strong, durable, ideal for tables, beams, and mantels
-
Ash – tough, flexible, commonly used for benches and custom builds
Common uses for rough sawn hardwood lumber:
-
Furniture and cabinetry
-
Tables, benches, and shelving
-
Stair components and treads
-
Mantels and exposed beams
-
Specialty trim and millwork
Hardwood Pricing
-
Starting at $4.00 / bdft
-
Custom sizing only – available upon request